There is a very inefficient way to go under the sidewalk. It's called a pick and shovel, in some cases, only a shovel. It will be a very long and frustrating. You feel like a mole and it will always ask: "It 's really the only way?"
Use a hose with a nozzle attachment
The most popular idea people come up with is awkward and slow. It 'something that you might read in a garden. Take your garden hose and anozzle and a little 'dig under the floor. Then the water for a long time to slowly eat away the dirt. What usually happens is so muddy you should wait a day or two to dry. Even if it goes really well, you are looking for a job a few hours. Is there a better way.
Dig the Bar: usually the best choice
You should buy a heavy digging bar. They are usually about six feet long with several points on one side and an end to the largesthammering. This is the easiest and by far the quickest. You dig a small hole in the bar next to the sidewalk (perpendicular). Then you take a bat and start hitting. It can be 15 minutes all the way to the other side. Then make your choice and hit a railroad Pulaski until you out. The whole process takes about thirty minutes.
After you pull the bar of graves, put the PVC pipe. Do whattape or cap on the end to prevent clogging with dirt. In most cases it will slide easily under the hand. Sometimes you touch it gently with the bat.
If the man has a herd of excavation deaf, not to mention he was wearing under the sidewalk. It 'definitely worth it.
You have a lot of compacted gravel or rocks to pass through? If you have many problems, just buy a galvanized pipe and grindthrough with a hammer. Then cut the side that is damaged by the hammer with a jigsaw or hacksaw. Then use a compression coupling on the pipe with PVC sheet.
Friends Link : Forced Air Heaters